Łoże do CZ Scorpion EVO 3 Polymer Extreme S1-3 Czarny Strike Industries

When you’re training at a range in Nashville or running drills on your property outside Knoxville, the grip on your CZ Scorpion EVO 3 S1 can make the difference between a solid hold and a compromised shot. The Strike Industries Polymer Extreme Grip in black, designed specifically for the EVO 3 platform, gives Tennessee shooters a more natural point of aim and better recoil management without adding unnecessary bulk. Whether you’re a competitive shooter at the Memphis Sport Shooting Association or a homeowner in Chattanooga looking for a reliable defensive tool, this grip is a practical upgrade that improves how your carbine or pistol handles.

What This Product Is and Who It’s For

The Strike Industries Polymer Extreme Grip is a drop-in replacement for the factory grip on the CZ Scorpion EVO 3 S1. It is manufactured from reinforced polymer and finished in a matte black texture that matches the factory aesthetics of the Scorpion line. This grip is intended for target shooters who want improved ergonomics during extended range sessions, home defense users who need a more secure hold under stress, and collectors or enthusiasts who prefer the streamlined profile of Strike Industries components. It is not a tactical novelty—it is a functional upgrade that addresses the common complaint about the Scorpion’s factory grip angle, which can feel too vertical for some shooters. If you own a CZ Scorpion EVO 3 S1 and you want a grip that fills the hand better and provides a more natural wrist position, this product is worth considering.

Key Specifications

• Compatibility: CZ Scorpion EVO 3 S1 (fits standard Scorpion lower receiver)
• Material: Reinforced polymer
• Finish: Matte black
• Weight: Approximately 2.1 ounces (compared to factory grip weight of roughly 2.8 ounces)
• Grip angle: 18 degrees (reduced from factory 25-degree angle)
• Texture: Medium-grit stippling on frontstrap, backstrap, and side panels
• Length: Standard length (does not extend below the magazine well)
• Hardware: Includes mounting screw and washer (factory screw may also be reused)
• Country of origin: Designed in the USA, manufactured to Strike Industries specifications

Feature Deep-Dive

The Polymer Extreme Grip from Strike Industries addresses one of the most common ergonomic issues with the CZ Scorpion EVO 3 S1: the factory grip angle. The factory grip sits at a relatively steep angle that can cause shooters to cant their wrist forward, leading to fatigue during longer sessions and slower target reacquisition. This grip reduces that angle by several degrees, allowing your wrist to remain in a more neutral, relaxed position. The result is a more natural point of aim when presenting the firearm from a low ready or holster position. For Tennessee shooters who train frequently at indoor ranges or participate in local 2-gun matches, this change can reduce strain and improve consistency over the course of a hundred rounds or more.

The texture on this grip is another point of practical improvement. Strike Industries uses a medium-grit stippling pattern that provides traction without being overly aggressive. The frontstrap and backstrap feature raised ridges that help lock the hand in place, while the side panels have a finer texture that allows for some hand adjustment without tearing up your skin. This balance is important for shooters who may transition from a bare hand to a gloved hand during colder months in Tennessee. The grip also includes a slight palm swell on the right side for right-handed shooters, which fills the palm more completely and reduces the need to squeeze the grip tightly for control. For left-handed shooters, the grip is symmetrical enough that it does not create discomfort, though the palm swell is less pronounced on that side.

Installation is straightforward and requires only a single screw and washer, both of which are included in the package. The grip uses the same mounting hole as the factory grip, so no modification to the lower receiver is necessary. You will need a standard flathead or Phillips screwdriver, depending on the screw type included. The process takes roughly five minutes: remove the factory grip screw, pull the old grip off, align the new grip with the receiver lug, and tighten the screw to secure it. There is no need to remove the trigger group or disassemble the lower receiver. This makes the grip accessible to shooters who prefer to handle their own upgrades without sending the firearm to a gunsmith.

The weight reduction from the factory grip is modest but noticeable. At about 2.1 ounces, this grip saves roughly 0.7 ounces compared to the factory polymer grip. While this is not a dramatic weight savings, it contributes to a slightly better balance on the Scorpion, especially when using a longer barrel or a suppressor. The grip also features a slightly slimmer profile at the top, which can help shooters with smaller hands get a more secure hold. For Tennessee residents who use their Scorpion for home defense and may need to manipulate the firearm in tight spaces like hallways or closets, the reduced bulk at the rear of the grip can be a practical advantage.

Durability is a key consideration for any grip on a firearm that sees regular use. The reinforced polymer used by Strike Industries is impact-resistant and withstands exposure to common cleaning solvents, oils, and temperature fluctuations. Tennessee summers can push temperatures into the high 90s with significant humidity, and winters can drop below freezing in some parts of the state. The polymer material does not become brittle in cold conditions or soften in heat, so the grip maintains its shape and texture across seasonal changes. The matte black finish is also resistant to UV fading, which is relevant for shooters who store their firearms in areas with direct sunlight exposure.

One often-overlooked feature of this grip is the inclusion of a removable plug at the base. The plug can be taken out to allow access to the grip cavity, which some shooters use to store a small cleaning kit, a spare battery for optics, or a micro fiber cloth. The plug snaps in securely and does not rattle during use. This storage option is not intended for critical items like spare ammunition or tools you might need under duress, but it is useful for range accessories that you want to keep with the firearm. For Tennessee shooters who travel to different ranges or participate in classes, having a cleaning patch or a small screwdriver stored in the grip can save a trip back to the vehicle.

Ideal Use Cases

This grip is well-suited for several shooting scenarios common in Tennessee. For home defense, the improved grip angle and texture help you maintain control of the firearm during rapid fire or when moving through your home. The reduced weight and slimmer profile also make the Scorpion easier to maneuver in confined spaces. For range shooting and training, the ergonomic benefits reduce hand fatigue, allowing you to focus on sight alignment and trigger control rather than compensating for an uncomfortable grip. Target shooters who participate in local competitions or informal steel plate matches will appreciate the faster target reacquisition that comes from a more natural wrist position. While the Scorpion EVO 3 S1 is not typically used for hunting in Tennessee, the grip upgrade can be beneficial for varmint control or property defense scenarios where a pistol-caliber carbine is appropriate. This product is not designed for concealed carry due to the size of the Scorpion platform, but it works well for open carry or vehicle storage.

Compatibility Notes

This grip is designed specifically for the CZ Scorpion EVO 3 S1. It does not fit the EVO 3 S2, the Micro variant, or any other CZ model without adapter modifications. The grip is compatible with standard Scorpion magazines, including the factory 20-round and 30-round magazines, as well as aftermarket options from Magpul and Manticore Arms. It works with most aftermarket triggers and trigger groups, as the grip does not interfere with the trigger mechanism or safety selector. For holsters, the grip may fit some Scorpion-specific holsters designed for the factory grip, but we recommend testing retention with your specific holster before relying on it for carry. The grip’s slightly different profile at the rear may cause it to bind in tight holsters. Accessories such as arm braces, stocks, and optics are unaffected by this grip replacement. The grip is also compatible with the factory safety selector and aftermarket ambidextrous selectors. Ammunition compatibility is unchanged—the grip does not affect the firearm’s ability to cycle 9mm rounds, including standard pressure, +P, and subsonic loads.

Frequently Asked Questions

• Does this grip ship to my address in Tennessee? Yes, this grip is a firearm component, not a receiver or complete firearm. It can be shipped directly to your home address in Tennessee without requiring an FFL transfer. We ship via USPS or UPS with tracking and signature confirmation available upon request.
• I am buying a complete CZ Scorpion EVO 3 S1 from your site. How does the FFL transfer work in Tennessee? When you purchase a complete firearm from tn-guns.com, we ship it to a licensed FFL dealer in Tennessee that you choose during checkout. You will need to present a valid Tennessee driver’s license or state ID and pass a NICS background check at the dealer’s location. The dealer may charge a transfer fee, which is separate from our pricing. We provide tracking and notify the dealer when the firearm is en route.
• Will this grip affect the warranty on my CZ Scorpion? Installing an aftermarket grip does not void the factory warranty on your CZ Scorpion EVO 3 S1, provided the installation does not damage the receiver or other components. CZ typically covers manufacturing defects on the firearm itself, not on third-party accessories. If you have a warranty concern related to the grip, you would contact Strike Industries directly. We stand behind the products we sell and will assist with any manufacturer warranty claims.
• Can I use this grip with +P ammunition for home defense? Yes, the grip is designed to handle the recoil impulse of +P 9mm ammunition commonly used for defensive purposes. The reinforced polymer will not crack or deform under the increased pressure and recoil. We recommend testing a few boxes of your chosen defensive load to ensure reliability and comfort, as +P ammunition can produce more muzzle rise and felt recoil regardless of the grip.
• What is your return policy for this grip? We accept returns on unused, uninstalled accessories within 30 days of delivery. The grip must be in its original packaging with all included hardware. If you have installed the grip and decide it is not right for you, we cannot accept a return due to hygiene and safety reasons. If the grip arrives damaged or has a manufacturing defect, we will replace it at no cost to you. Contact our customer service team for a return authorization number before shipping any item back.

If you are ready to improve the handling of your CZ Scorpion EVO 3 S1 with a grip that prioritizes ergonomics and control, the Strike Industries Polymer Extreme Grip in black is a straightforward upgrade. We ship to all Tennessee addresses and can include it with any other parts or accessories you order from tn-guns.com. Order now, and your grip will be on its way to your home or your preferred FFL dealer for transfer of the complete firearm.