CVA Scout V2 Stainless Steel Break Action Rifle – 45-70 Government – 25in

CVA Scout V2 Stainless Steel Break Action Rifle – 45-70 Government – 25in

For Tennessee hunters who know the dense hardwood hollows of the Cumberland Plateau or the open fields of the Mississippi Delta, the .45-70 Government cartridge has been a trusted companion for over a century. The CVA Scout V2 Stainless Steel Break Action Rifle, with its 25-inch barrel, offers a modern take on this classic caliber, purpose-built for the Volunteer State’s diverse terrain. Whether you’re tracking whitetail in the Cherokee National Forest or punching paper at a local range near Nashville, this single-shot rifle delivers reliable performance without unnecessary complexity.

What This Product Is and Who It’s For

The CVA Scout V2 is a break-action, single-shot rifle chambered in .45-70 Government. It is designed for shooters who prioritize accuracy and simplicity over magazine capacity. This rifle is well-suited for hunters who pursue large game such as deer, black bear, or wild boar, where the .45-70’s stopping power is a practical advantage. Target shooters who enjoy the discipline of single-shot marksmanship will also find this model appealing, as it encourages careful shot placement. Collectors who appreciate stainless steel construction and traditional break-action mechanics may also be drawn to this firearm. It is not intended for home defense or concealed carry, given its length and single-shot design, but it excels in hunting and range applications.

Key Specifications

• Caliber: .45-70 Government
• Action Type: Break-action, single-shot
• Barrel Length: 25 inches
• Overall Length: Approximately 40.5 inches
• Weight: Roughly 7.2 pounds (unloaded)
• Finish: Stainless steel barrel and receiver
• Stock: Ambidextrous synthetic stock with soft rubber butt pad
• Sights: Adjustable rear sight and fiber optic front sight; receiver is drilled and tapped for scope mounts
• Trigger: CVA’s Trigger System with a crisp, adjustable break
• Safety: Manual hammer-block safety
• Capacity: 1 round
• Twist Rate: 1:20 inches, optimized for heavy .45-70 bullets

Feature Deep-Dive

The CVA Scout V2’s stainless steel construction is a practical choice for Tennessee’s variable weather. Rain, humidity, and mud are common across the state, from the Smoky Mountains to the western wetlands. The stainless finish resists corrosion more effectively than blued steel, meaning less time worrying about rust and more time focusing on your shot. The 25-inch barrel provides a good balance between maneuverability in brush and velocity for flat trajectory at moderate ranges. This barrel length also reduces muzzle blast compared to shorter barrels, making it more comfortable for extended range sessions.

The break-action design is one of the simplest and most reliable actions available. There are no complex gas systems, bolts, or magazines to malfunction. Opening the breech manually ejects the spent casing, and loading a fresh round is straightforward. This simplicity contributes to the rifle’s reputation for consistent accuracy, as the barrel is fixed and does not rely on moving parts that can shift under recoil. The single-shot format also encourages hunters to make each shot count, which is a practical approach when pursuing game in Tennessee’s often thick cover.

CVA’s Trigger System is a notable feature on this model. The trigger is adjustable for pull weight, allowing shooters to fine-tune it to their preference. Out of the box, it offers a clean break with minimal creep, which aids in precision shooting. The trigger is complemented by a hammer-block safety that is intuitive to use: simply cock the hammer when ready to fire, and lower it with the safety engaged when not in use. This system provides a clear visual indicator of the rifle’s status, reducing the chance of accidental discharge.

The synthetic stock is designed for durability and comfort. It is made from a reinforced polymer that withstands impacts and temperature changes without warping. The stock features a soft rubber butt pad that absorbs recoil, which is particularly beneficial with the .45-70 Government cartridge, known for its substantial push. The stock’s ambidextrous design means it fits both left- and right-handed shooters without modification. The forend is slim enough to allow a firm grip, even with gloved hands in cold Tennessee mornings.

The sights on the Scout V2 are a fiber optic front and adjustable rear, which provide a clear sight picture in low-light conditions. This is useful during dawn and dusk hunts when deer are most active. The receiver is also drilled and tapped for standard scope bases, so you can mount a low-power variable scope for longer shots or a red dot for faster acquisition in thicker woods. The 1:20 twist rate is specifically chosen to stabilize heavy .45-70 bullets, such as 300-grain or 405-grain loads, which are common for hunting large game. This twist rate also works well with cast lead bullets for target shooting.

Ideal Use Cases

This rifle is primarily intended for hunting. The .45-70 Government cartridge delivers substantial energy at typical hunting distances under 200 yards, making it effective for whitetail deer, black bear, and feral hogs. The stainless steel finish and synthetic stock are well-suited for field conditions, including rain and mud. The rifle’s weight, just over seven pounds, is manageable for carrying on long walks through Tennessee’s public hunting lands. For target shooting, the single-shot design and crisp trigger allow for precise shot placement at the range. The Scout V2 is not recommended for home defense due to its length and limited capacity, nor for concealed carry. It could be used in certain single-shot rifle competitions, but it is not a primary choice for high-volume action shooting.

Compatibility Notes

The CVA Scout V2 in .45-70 Government accepts standard .45-70 ammunition, including factory loads from manufacturers like Federal, Remington, and Hornady. It can also handle handloads within SAAMI pressure specifications. The rifle does not use detachable magazines; it loads directly into the chamber. For holsters, this firearm is not designed for carry, so no holster is needed. Accessories include scope rings and bases (standard Weaver-style or Picatinny), as well as sling swivel studs that are pre-installed on the stock. Aftermarket muzzle brakes or suppressors can be added if the barrel is threaded, but note that this model does not come with factory threading. Cleaning kits and bore guides specific to .45-70 are recommended for maintenance.

FAQ

1. Can this rifle be shipped directly to my home in Tennessee?
No. Federal law requires that firearms purchased from a licensed dealer be shipped to another Federal Firearms License (FFL) holder for transfer. We ship to any licensed FFL in Tennessee, including your local gun shop or a pawnbroker with a license. You will need to complete a background check and any state-specific paperwork at the receiving FFL before taking possession.

2. How does the FFL transfer process work when ordering from tn-guns.com?
After you place your order, we will contact you to confirm the FFL details of your chosen transfer dealer. You must provide us with the dealer’s name, address, and a copy of their FFL license (or we can verify it through our database). Once we receive the license, we ship the rifle via a common carrier. The receiving FFL will contact you when it arrives. You then visit the dealer, complete the required ATF Form 4473, pass the background check, and pay any transfer fee the dealer charges (usually $20–$50).

3. What ammunition is compatible with this rifle?
This rifle is chambered for .45-70 Government ammunition. It will safely fire all factory-loaded .45-70 cartridges, including those with bullet weights from 250 grains to 405 grains. We recommend using ammunition that meets SAAMI specifications. Reloaders should follow standard load data for .45-70. Do not use .45-70 ammunition that exceeds SAAMI pressure limits, such as some “Ruger only” loads, unless you have confirmed they are safe for this specific firearm.

4. What is the warranty on the CVA Scout V2?
CVA (Connecticut Valley Arms) offers a limited lifetime warranty on the Scout V2 against defects in materials and workmanship. This warranty covers the original owner and is not transferable. If you experience a manufacturing defect, contact CVA directly for repair or replacement. Normal wear and tear, improper use, or modifications are not covered. We recommend keeping your sales receipt for warranty claims.

5. Can I return the rifle if I change my mind?
We accept returns on firearms only if the item is unused and in original packaging within 30 days of delivery. The rifle must be returned to our store in Tennessee, and we will inspect it before processing a refund, minus a 15% restocking fee. Firearms that have been fired, modified, or damaged cannot be returned. For defective items, the warranty process with CVA is the appropriate route. Contact us before shipping any returns for specific instructions.

Closing CTA

This CVA Scout V2 Stainless Steel Break Action Rifle is available now for shipment to any licensed FFL in Tennessee. Whether you are in Memphis, Knoxville, or a small town in between, we can help you get this rifle transferred to your local dealer. Place your order on tn-guns.com, and we will handle the rest. For questions about FFL transfers or ammunition compatibility, contact our team directly. We are a Tennessee-based FFL retailer, and we are here to serve the Volunteer State’s shooters and hunters.